Filter
Top Products
Troubleshooting and Maintenance 51
G. REPLACING THE PRINTHEAD
Regular replacement of the printhead is not necessary.
However it may become necessary if you notice a gradual
decrease in print quality or if some of the print nozzles are
still clogged after repeated manual cleanings as described in
Section 5F.
Follow this procedure:
1. Press the Pause and Load/Feed buttons simultaneously to
move the print carriage to the center of the print area.
2. Remove all cartridges. Press the release tab at the front of
the carriage to release the latch.
Press Pause + Load/Feed
to Start and Finish.
Power
Ink
Pause
Load/
Feed
Unload
LX900.qxd 6/22/2011 6:40 AM Page 51
TOC
INDEX
TOCTOC
INDEX