Filter
Top Products
Interface Frequency
1.The following frequency range is the working period. If the entered mode between below period but not match
the frequency of supported timing, display optimization would not be assured. If the entered mode is out of the
working period, the display will be blanking (just show “Input Signal Out Of Range”) then go to power saving.
2.Basically, mode judgment is regardless the sync polarity except both or more modes that are all belong to the
supported timing list and could be judged by sync polarity only.
3.At the meantime, real entered frequency of the supported timing is not requested exactly.
4.Normalization of VGA card’s deviation will be acceptable.
5.Horizontal Frequency 30 KHz---80 KHz
6.Vertical Frequency 50 Hz---75 Hz
11