Filter
Top Products
DT Chassis Printers/Plotters
Operation
3-1
Loading Paper
Loading An Internal Roll
3 Insert Roll In Printer
Slip the paper rod through the core of
the new paper roll and install the paper
roll on the carrier so the paper feeds
from the top of the roll toward the front
of the carrier. Feed a few inches of
paper from the roll so it will extend
over the platen after insertion.
Insert the paper carrier in the printer and
close the door with the latches unlocked.
Remove the paper carrier from the
printer and remove the paper rod
from the carrier. Slip the empty
core off the paper rod.
2 Remove Paper Holder
4 Lock Door
Press on the solid circles printed on the
door latches to lock them. Tear off the
extra paper.
1 Unlock Door
Unlock the door of the printer by
pressing on the open circles printed on
the two latches at the lower corners of
the door. Pull up on the latches to open
the door.