![](http://pdfasset.owneriq.net/0/68/068ac398-3adc-4c7f-8904-723d07e3103f/068ac398-3adc-4c7f-8904-723d07e3103f-bg20.png)
Chapter 2 Powering On The Printer
32
5. Turn on the printer by setting the power switch to | (on). When
you power on the printer, the following occurs:
a. The printer reads the emulation boot file and displays the
message:
H0: TEST HARDWARE
PLEASE WAIT...
b. The ONLINE indicator lights continuously and STAND BY
goes out.
NOTE: The printer can be set to power on in the OFFLINE state
instead of the ONLINE state. To print, ONLINE must be lit;
if it is not, press ONLINE.
If other messages and prompts appear on the control panel,
answer the prompts and follow the directions as explained on page
120.