Filter
Top Products
11
Unpacking And Installing The Printer
NOTE: This
Quick Setup Guide
covers both the SL5000r and
T5000r printers.
The SL5000r is a smart label printer: it is equipped with an
RFID encoder and has the “RFID Smart” logo near the
control panel.
The 4 and 6 inch T5000r printers do not come equipped
with RFID encoders, but are field upgradable to SL5000r
printers.
The 8 inch T5000r printer is currently not RFID compatible.
Unpacking The Printer
The printer is shipped in a carton and protective bag. Keep all
packing material in case shipping is required.
CAUTION
Avoid touching the electrical connectors to prevent
electrostatic discharge damage while setting up the printer.
The discharge of accumulated electrostatic energy can
damage or destroy the printhead or electronic components
used in this device.
CAUTION
Do not place the printer on its backside during unpacking or
handling, because damage to the printer interface connector
may occur.