Filter
Top Products
Cleaning
54
Cleaning
Depending on the media used, the printer may accumulate
residues (media dust, adhesives, etc.) as a by-product of normal
printing. To maintain top printing quality, you should remove these
residues by cleaning the printer periodically.
Exterior
Clean the exterior surfaces with a clean, lint-free cloth. If
necessary, use a mild detergent or desktop cleaning solution.
NOTE: Do not use abrasive cleaning agents or solvents.
Interior
Clean the interior of the printer by removing any dirt and lint with a
soft-bristled, non-metallic brush. Use a vacuum cleaner to remove
the residue.
General Cleaning
Periodically clean all rollers, guides, and assemblies. Use low
pressure air to remove dust in the printer. Use isopropyl alcohol and
a cotton swab to clean any areas where media dust, adhesives, etc.
have accumulated.
Cleaning The Printhead, Platen Roller, And
Media Sensors
NOTE: You do not need to turn off the printer before cleaning the
printhead, platen roller, or media sensors.
Printhead Cleaning
As you use your printer, the printhead may become dirty which can
result in poor print quality. Clean the printhead each time you install
new ribbon (thermal transfer print mode) or install new media