Filter
Top Products
QUICK SETUP Configuration Menu
28
Label Length
In most applications, the user-selected Label Length will match the
physical label length. Physical label length is the actual label length
of the media installed. Following is a list of different media types:
• Die-cut labels – measurable length of the removable label
(leading edge to trailing edge). This does not include the
liner material or gap.
• Tag Stock with notches or holes – measurable length from
the trailing edge of one notch or hole to the trailing edge of
the next notch or hole.
• Tag Stock with black marks on the underside – measurable
length from the leading edge of one black mark to the
leading edge of the next black mark.
• Continuous media (no label length indicators) –
measurable length should be within +
1-2% of the Label
Length value entered.
Label Width
The allowable range in inches is 00.1 to the maximum print width of
the printer. The allowable range in millimeters is 2.5 to the
maximum width of the printer.
Ver Image Shift
Specifies the amount to shift an image up (-) or down (+) for precise
positioning on the label. The actual height of the image is not
affected by this parameter. The allowable range is -1.00 inches to
the current Label Length value setting, up to a maximum of 12.80
inches in .01 inch increments.
The factory default value is 0.00 inches.