Filter
Top Products
QUICK SETUP Submenus
33
• Disable.The printer will not command the validator to begin
scanning and no errors will be reported. The counters will not
be incremented while the validator is disabled.
NOTE: If you save a configuration with the validator enabled,
power down and power up, and the validator is not
connected or not functioning, the error message “Validator
not communicating” will display briefly. The Validator menu
will not display.
If the validator is installed, the default is Enable.
Save Config.
Allows you to save up to eight unique configurations to meet
different print job requirements. This eliminates the need to change
the parameter settings for each new job. The configurations are
stored in memory and will not be lost if you turn off the printer. The
factory default is 1.
Power-Up Config.
You can specify one the eight configurations as the power-up
configuration. The factory default is Factory.
For More Information
This Quick Setup Guide has provided general information for use of
your printer. Please refer to your User’s Manual for more detailed
information including:
• Other Configuration Menus
• Interfaces
• Diagnostics and Troubleshooting
• Printer Options
• Specifications
• Media Cutter Installation Instructions
• Glossary of Terms