Filter
Top Products
VTrak E-Class Quick Start Guide
12
2. Connect each Host PC’s or Server’s standard NIC to your network switch.
Figure 11.VTrak E310f SAN data and management connections
Configuring Direct Attached Storage
Direct attached storage (DAS) requires:
• Two Fibre Channel HBA cards in the Host PC or Server
• A network switch
• A network interface card (NIC) in the Host PC or Server
To establish the data path:
On the VTrak controller, connect one of the Fibre Channel data ports to your
Fibre Channel switch. See Figure 12.
To establish the management path:
1. On the VTrak controller, connect the Management Port to your network
switch. See Figure 12.
2. Connect the Host PC’s or Server’s standard NIC to your network switch.
Mgmt
UPS
115200
8 N 1
FC 1 FC 2
4
2
1
Gb/s
4
2
1
Gb/s
Mgmt
UPS
115200
8 N 1
FC 1 FC 2
4
2
1
Gb/s
4
2
1
Gb/s
O
I
O
I
Host PC or Server
VTrak
Network Switch
FC Switch
Host PC or Server