Filter
Top Products
40
Advanced Parameters
emaNretemaraPegnaRtluafeD
sserddAPIteS-0.0.0.0
esabataDgnidrawroF
tuoemiTelbaT
sdnoces000,000,1ot01003
edoMevaSrewoPUPCN/YoN
edoMohcE
dna,elpmiS,enoN
lanimreT
lanimreT
troppuSlacinhceT
sseccA
A/NA/N
Set IP Address allows you to assign the Ethernet Adapter a
unique network IP address. If the unit is attached to an Ethernet-
ready device, do not assign the Ethernet Adapter the same IP
address as the Ethernet-ready device. The Ethernet Adapter
must have its own IP address if you choose to give it one.
Note:
The IP Address parameter is provided for diagnostic
purposes so that a remote system may ping the Ethernet
Adapter.
The Forwarding Database Table Timeout parameter allows
you to control the length of time the Ethernet Adapter will hold a
learned address of a network node in its Forwarding Database
Table. This data is dynamically acquired by the RangeLAN2
Ethernet Adapter so that it can forward packets properly to wired
and wireless nodes. By default, a Forwarding Database Table
entry will expire after 300 seconds or 5 minutes.