Filter
Top Products
Front projection
ceiling mount
Front projection
Table mount
Rear projection
Ceiling mount
Rear projection
Table mount
screen
projector
screen
screen
screen
projector
projector
projector
Maintenance
When projector working ,the projector will be overheat
Now many projectors use fans to cold it .But our projector use
two filters to cold the projector .When use the projector,there
will be some dirt to cover the filter . So please clean the
filters per month.
Following step:
1.Remove the grille as picture
2.Clean the dust on the filter by water and dry the filter again.
And install the filte well
21
Projector installation
6
Warning
1 This projector might damage beyond repair when it is incorrectly mounted on
a ceiling or when its incorrectly installed on a surface or installed on a
incorrect surface. It may also inflict damage to persons within close vicinity.
2)This projector can only be used in an environment with a temperature not
exceeding the range of 0- 35 degree .The projector may malfunction if
temperatures vary outside the normal operating range.
3 The sharpness of the screen might be interrupted when the
projector is being used in a dusty,wet,moist or smoke filled
environment. The projector might malfunction in a moist or wet
environment.
4 Take care of sufficient ventilation around the projector.
Otherwise this projecctor might overheat and cause life threatening
situations
Installation method:
contact a proffessional service man to mount this projector to a ceiling
follow the instructions belowe for the corret projector positions: