Q-Logic 7.1 Switch User Manual


 
5 – Fibre Alliance MIB Objects
Connectivity Table
59047-09 C 5-9
A
connUnitProduct (1.3.6.1.3.94.1.6.1.7)
The sml attribute Config.Snmp.SysDescr. This is the system description shown on
the 'show version' telnet screen. It can also be read on the 'show setup snmp'
screen and written using the 'set setup snmp' Telnet screen.
Syntax
DisplayString (SIZE (0..79))
Access
read-only
Status
mandatory
Return Value
Returns the switch SystemDescription: SANbox 5200 = SANbox 5200 FC
Switch, SANbox 5202 = SANbox 5602 FC Switch, SANbox 5600 = SANbox
5600 FC Switch, SANbox 5602 = SANbox 5602 FC Switch, SANbox 9100 =
SANbox 9100 FC Switch, SANbox 9200 = SANbox 9200 FC Switch.
connUnitSn (1.3.6.1.3.94.1.6.1.8)
The serial number for this connectivity unit.
Syntax
DisplayString (SIZE (0..79))
Access
read-only
Status
mandatory
Return Value
The chassis serial number.
connUnitUpTime (1.3.6.1.3.94.1.6.1.9)
The number of centiseconds since the last unit initialization.
If installed board's faultList is not NONE warning (4)
Table 5-4. SANbox 9000 Series Connectivity Unit Return Values
Status Return Value