Q-Logic 7.1 Switch User Manual


 
5 – Fibre Alliance MIB Objects
Port Table
5-38 59047-09 C
S
connUnitPortFCId (1.3.6.1.3.94.1.10.1.11)
This is the assigned Fibre Channel ID of this port. This value is expected to be a
Big Endian value of 24 bits. If this is a loop, then it is the ALPA that is connected. If
this is an E_Port, then it will only contain the domain ID left justified, zero filled. If
this port does not have a Fibre Channel address, returns all bits set to 1.
Syntax
FcAddressId
Access
read-only
Status
mandatory
Return Value
The address for each port based on Domain, Area, and ALPA. For example,
port #15 would be equal to 640F00 (Domain = 0x64, Area = 0x0F, ALPA =
0x00).
connUnitPortSn (1.3.6.1.3.94.1.10.1.12)
The serial number of the unit. If not applicable, returns an empty string.
Syntax
DisplayString (SIZE(0..79))
Access
read-only
Status
unsupported
Return Value
Return Value = The media part number of the SFP (or MediaPartNumber) if
installed.
connUnitPortRevision (1.3.6.1.3.94.1.10.1.13)
The port revision. For example, for a GBIC.
Syntax
DisplayString (SIZE(0..79))