Q-Logic 7.8 Switch User Manual


 
5 – Fibre Alliance MIB Objects
Connectivity Table
59047-09 C 5-15
A
connUnitModuleId (1.3.6.1.3.94.1.6.1.19)
This is a unique ID, persistent between boots, that can be used to group a set of
connUnits together into a module. The intended use would be to create a
connUnit with a connUnitType of “module” to represent a physical or logical group
of connectivity units. Then, the value of the group would be set to the value of
connUnitId for this “container” connUnit. connUnitModuleId should be zeros if this
connUnit is not part of a module.
Syntax
FcGlobalId
Access
read-only
Status
mandatory
Return Value
The World Wide Name of the switch followed by 8 bytes of zeros. For
example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.
connUnitName (1.3.6.1.3.94.1.6.1.20)
A display string containing a name for this connectivity unit. This object value
should be persistent between boots.
Syntax
DisplayString (SIZE(0..79))
Access
read-write
Status
mandatory
Return Value
The SymbolicName of Switch. The default's are: SANbox 5200 = SANbox,
SANbox 5202 = SANbox, SANbox 5600 = SANbox, SANbox 5602 =
SANbox, SANbox 9100 = SANbox, SANbox 9200 = SANbox