Q-Logic 7.8 Switch User Manual


 
59047-09 C 1-1
1 Introduction
This guide describes the support for Simple Network Management Protocol
(SNMP) used with SANbox switch products. This Simple Network Management
Protocol Reference Guide describes how to use SNMP to manage and monitor
the SANbox switch products.
This guide is organized as follows:
Section 2 provides an overview of SNMP objectives, managers and agents,
traps, Management Information Bases (MIB), and User Datagram Protocol.
Section 3 describes how to configure a SANbox switch using Telnet and the
Enterprise Fabric Suite 2007 graphical user interface.
Section 4 describes the Management Information Bases (MIB-II).
Section 5 describes the Fibre Alliance - Management Information Bases
(FA-MIB version 4.0).
Section 6 describes the Fabric Element - Management Information Bases
(FE-MIB).
Section 7 describes the QLOGIC Management Information Bases
(QLOGIC-MIB).
Section 8 describes the Firmware Download Management Information
Bases (FD-MIB).
Intended Audience
This guide is intended for users responsible for the support of SNMP and SANbox
switch configurations.