Filter
Top Products
3 – Configuring a Switch
Configuring a Switch Using the Command Line Interface
59047-09 C 3-5
A
3=alert 8=info
4=critical 9=debug
5=error 10=mark :
Trap3Version (1 / 2) :
Trap3Community (string, max=32 chars) :
SNMP Trap 4 Configuration - may optionally use 'set setup snmp trap 4'
command.
Current Values:
Trap4Enabled False
Trap4Address 0.0.0.0
Trap4Port 162
Trap4Severity warning
Trap4Version 2
Trap4Community public
New Value (press ENTER to not specify value, 'q' to quit):
Trap4Enabled (True / False) :
Trap4Address (hostname, IPv4, or IPv6 Address) :
Trap4Port (decimal value, 1-65535) :
Trap4Severity (select a severity level)
1=unknown 6=warning
2=emergency 7=notify
3=alert 8=info
4=critical 9=debug
5=error 10=mark :
Trap4Version (1 / 2) :
Trap4Community (string, max=32 chars) :
SNMP Trap 5 Configuration - may optionally use 'set setup snmp trap 5'
command.
Current Values:
Trap5Enabled False
Trap5Address 0.0.0.0
Trap5Port 162
Trap5Severity warning
Trap5Version 2
Trap5Community public
New Value (press ENTER to not specify value, 'q' to quit):
Trap5Enabled (True / False) :
Trap5Address (hostname, IPv4, or IPv6 Address) :
Trap5Port (decimal value, 1-65535) :
Trap5Severity (select a severity level)
1=unknown 6=warning
2=emergency 7=notify
3=alert 8=info