Filter
Top Products
2–Boot from SAN
Configuring Boot from SAN
2-4 IS0054604-00 A
Configuring Boot from SAN
Boot from SAN Installation on SLES 11 SP2 and RHEL 6.2
To configure the adapter for BFS on SLES 11 SP2 or RHEL 6.2, follow these
steps:
1. While the system is booting up, press CTRL+Q to enter Fast!UTIL on the
iSCSI BIOS banner, as shown in Figure 2-1.
Figure 2-1. Entering Fast!UTIL from the Adapter’s BIOS