Q-Logic 9200 Switch User Manual


 
SANbox 9000 Series Stackable Chassis Switch HyperStack Cable Installation
4 59238-01 A
D
Complete the HyperStack
Cable Connections
Connect the remaining HyperStack cable
connectors as shown in the illustration. These
copper cables are very flexible and can be bent
as needed without damage.
NOTE:
This is the only cabling configuration that is
supported. Any other configuration will result in
an error.
Secure the HyperStack Cables
Secure the cables in place using ties wraps as
shown. Secure the outer cables to the rack
posts; secure the inner cables to each other. This
reduces cable clearance to 7–8 inches and
provides room for the removal of the Power
Supply and Fan blades on the lower switch.
1. Tie Wraps
1