Q-Logic QLA12160 Computer Hardware User Manual


 
Scan SCSI Bus A Fast!UTIL
A-8 DC8151101-00 C
A.2.6
Restore Default Settings
The Restore Defaults option from the Configuration Settings menu restores the
QLA12160 board default settings, which are displayed in SCSI Device Settings.
Use the arrow keys to change settings. See section A.2.2 for more information about
SCSI Device Settings and see section A.2.1 for Host Adapter Settings.
A.2.7
Raw NVRAM Data
This option displays the adapters nonvolatile random access memory (NVRAM)
contents in hexadecimal format. This is a troubleshooting tool; you cannot modify
the data.
A.3
Scan SCSI Bus
This option scans the SCSI bus and lists all connected devices by SCSI ID.
Information about each device is listed, for example, vendor name, product name,
and revision. This information is useful when configuring your QLA12160 board and
attached devices.
A.4
SCSI Disk Utility
This option scans the SCSI bus and lists all the connected devices by SCSI ID. You
can select a disk device and perform a low-level format or verify the disk media.
CAUTION!
Performing a low-level format destroys all data on the disk.
A.5
Using SCSI-1 Devices
The QLA12160 board is configured at the factory with default parameters that
provide maximum performance. When the board is operating at maximum
performance, it may not be 100% compatible with some older SCSI-1 devices.
If the SCSI-1 device attached to the QLA12160 board is not functioning correctly,
you can turn off some high-performance parameters for maximum compatibility.
Follow these steps:
1. When you power up the system, press CTRL+Q to access Fast!UTIL.
2. Select Configuration Settings from the Fast!UTIL Options menu.