Filter
Top Products
9. The "New Hardware Found" dialog will repeat for each of the serial ports on the
DSC-200/300 as each port is registered with Windows.
10. Installation is complete.
5.6 Windows NT
The Windows NT device driver is installed by running the SETUP program. Up
to 256 serial ports are supported. There is a command line-based configuration utility
which is used for adding PCI bus and ISA bus serial ports. Please refer to the
documentation included with the device driver for full installation and configuration
details.
Device drivers for Windows and OS/2 are also available for the DSC-200/300.
The board can be used under DOS and other operating systems as well in many
circumstances. The software described below can be obtained from the Quatech web
site if it did not come with the board.
Quatech DSC
-200/300 User
'
s Manual
24