Filter
Top Products
The QTPCI program is capable only of displaying the PCI configuration. It
cannot be used to make changes.
Q - Quatech PCI adapters
N - Other PCI devices
X - EXIT
M - Change to Expert Mode
Quatech PCI Configuration Information Display Software
Version 1.00
INSTRUCTIONS:
------------------------
Press keys listed in the menu at the bottom of the screen.
This program only displays information. It cannot make changes.
PCI BIOS detected, version 2.10
Quatech PCI adapters detected
---------------------------------------------
DSC-200/300 Two-port RS-422/485 adapter (Hardware Revision A1)
Uses IRQ 3
Base addr 1 = 0xffa80 I/O
_
Numbers preceeded by "0x" are hexadecimal.
Figure 15 --- QTPCI.EXE Basic Mode display
Figure 16 shows the Expert Mode display for the DSC-200/300 after the "Q" key
has been pressed. The information from the Basic Mode display is presented along
with more details such as the Vendor and Device IDs, PCI Class Code, size of memory
and I/O regions, etc. Pressing the "N" key will show similar information for all
Quatech DSC
-200/300 User
'
s Manual
26