Filter
Top Products
Rev. JUL-02
FAQ – Sun Server
Sun Server are using resolution at 1152 x 900 x 76Hz
Supported resolution mode
640 x 480 x 70/75Hz
800 x 600 x 70/75Hz
1024 x 768 x 70/75Hz
1280 x 1024 x 75Hz (17” LCD)
Note the Max. frequency of 13.3” is 70Hz
You need to change the Sun Server resolution before you connect to LCD
Display
Please do the following procedure to change the resolution setting :
1. as root:
you may find the following comment “/user/sbin/m64config”
2. Type “/user/sbin/m64config – prconf”
to view current resolution
3. Type “/user/sbin/m64config – res 1024x768x70 now”
to change to 1024x768 @ 70MHZ
4. the screen will be rubbish
5. Then type “pkill Xsun”
6. And Type “pkill Xsession” to restart the Xsession
Remember this process need to RESTART the server
Under Common Desktop Environment (CDE)
To change the OpenBoot resolution, you can type the following commend in OK prompt
1. In OK prompt, type “setenv output-device screen:r1024x768x70”
2. Type “printenv” to confirm the resolution has been changed to 1024x768x70Hz
3. Then type “reset” to restart the system
Remember this process need to RESTART the server