Filter
Top Products
9
2. Install two batteries in the compartment and two in the cover as
indicated by the polarity symbols (+ and –) marked inside each
location.
3. Replace the cover.
When
BATT.Lo flashes and the scanner beeps every 15 seconds, im-
mediately replace or recharge all four batteries.
Cautions:
• If you do not plan to use the scanner with batteries for a month or
more, or if you plan to use only an AC or DC adapter, remove the
batteries. Batteries can leak chemicals that can destroy electronic
parts.
• Dispose of old batteries promptly and properly. Do not burn or bury
them.
IMPORTANT INFORMATION ABOUT THE
EXTERNAL POWER JACKS
The scanner has two external power jacks —
POWER
and
CHARGE
. It
is important that you understand the purpose of each jack before you
connect any adapter to the scanner.
CHARGE Jack
POWER Jack
20-311a.fm Page 9 Friday, February 12, 1999 4:51 PM