RadioLAN Campus BridgeLINK Network Card User Manual


 
890-007 Rev. A 01/28/99 Page 12 © 1999 RadioLAN, Inc.
Initial IP Address Setup
Before you can use the TCP/IP management services of
a CPU, it must contain a valid network IP Address. There
are three ways to assign an IP Address to the CPU:
Connection between the CPU and a PC on the same
local LAN segment
A VT-100 terminal connection to the CPU Local Port
This section describes in detail each method for assigning
the CPU an IP Address.
Figure 10: Quick Configuration
10BaseT Ethernet
or Crossover Cable
10BaseT Network
Interface Card
CPU
Power
Adapter