Filter
Top Products
890-007 Rev. A 01/28/99 Page 43 © 1999 RadioLAN, Inc.
SNMP Parameters
The SYSTEM CONFIGURATION -SNMP PARAMETERS
PAGE contains fields that specify the SNMP
management and notification parameters. The local
agent can communicate with up to five remote
managers. You can edit SNMP Managing Hosts by
clicking the Edit button. There are three messages
that the CPU sends to Trap addresses:
Cold Start The CPU sends this
message when it powers on.
Warm Start The CPU sends this
message when software
resets the CPU.
User Authentication The CPU sends this
message if you placed a
check mark in the Enabled
Authentication Trap check
box, and if a user had been
denied access to the CPU Web Site three times.
Figure 28: SNMP Parameters Page