Filter
Top Products
CHAPTER 3: OPERATION 5
Chapter 3: Operation
Overview
You can operate CS-PENT using the buttons on its front panel. The lights on the front panel of
the unit indicate the status of operation.
Note: Numbered channel buttons have two functions.When the Scan light is OFF, the buttons are
used to select channels. When the Scan light is ON, the buttons are used to set scan rate.
Front Panels
On the front panels of the different CS-PENT units, you will find that CS-PENT 2 has buttons
marked 1 and 2, and a button marked [SCAN]. CS-PENT 4 has buttons marked 1 through 4, and
buttons marked [SCAN] and [SKIP]. CS-PENT 8 has buttons marked 1 through 8, and buttons
marked [SCAN] and [SKIP].
Figure 8 Front panel of CS-PENT 2 Unit
Figure 9 Front Panel of CS-PENT 4 Unit
Figure 10 Exploded View of Scan Rates from the CS-PENT 4 Front Panel
Figure 11 Front Panel of CS-PENT 8 Unit