Filter
Top Products
Windows98
21
3-1-1.Windows 98 DV Driver Setup
Step 1.Install the DV driver
If you are using Windows98, you have to install the driver “SONYDVCR.SYS”
attached to the RATOC IEEE1394 PCI Board CD-ROM.The SONYDVCR.SYS supports
standard AVC/FCP command set, so it is compatible to all DVCAMs which come from any
manufacturers such as SONY, Canon, Panasonic and JVC.
1.For the first time, you connect your DVCAM and turn it on, Hardware Wizard will
detect your DVCAM and the following screen will appear automatically. Click [Next].
(If the following screen did not start, please refer to Chapter 10-2.)
2.When the following window appears, select [Search for the best driver for your device
(Recommended)]. Then click [Next].