Ratoc Systems PCIFW1U Switch User Manual


 
35
3-3.1394 Storage Installation
This section describes how to connect a 1394 storage and install the driver. 1394 storage means Hard
Disk Drives(HDDs), Magneto Optical Disks(MOs), etc. Only Windows98 Second Edition, Windows
2000 or Windows Me support such 1394 storage.
Follow steps through to connect a 1394 Hard Disk Drive(HDD).
1.Connect a 1394 HDD to the PCIFW1U with an 1394 6pin-6pin cable.
2.You can connect the 1394 HDD without turning off the PC or 1394 HDD.
When your Windows version is Windows 98 SE(Second Edition), go to the section 3-3-1.
When your Windows version is Windows 2000, go to the section 3-3-2.
When your Windows version is Windows Me(Millennium Edition), go to the section 3-3-3.
NOTE
The 6 pin to 6 pin cable is not included in the PCIFW1U package.