RCA DLA-SX21U, DLA-SX21E, DLA-SX21SU, DLA-SX21SE Projector User Manual


 
24
Power cord (supplied)
2
1
Connecting to Various Devices
1.
Connect the supplied power cord to the power input ter-
minal of the projector.
2.
Insert the main plug of the supplied power cord into the
wall outlet.
After all devices have been connected, connect the supplied power cord.
Connecting the Power Cord (supplied)
Lens Cap
Cautions Against Fire and Electric Shock
Since the power requirement of the projector is high, please insert the power plug directly into a wall outlet.
When not using devices, remove the power cords from the wall outlets.
Do not use power cords other than those supplied.
Do not use a power voltage different from that which is indicated.
Do not cut, tear or modify the power cords. Also, do not put a heavy object on, heat, or stretch the power cords, otherwise they
may be damaged.
Do not insert or pull out the plugs with a wet hand.
When using the projector:
Remove the lens cap.
Be sure to fit the lens cap on when the projector is not in use to
keep out dirt.
Please do not project with the lens cap on. The Lens cap may be
deformed by heat.
Removing the Lens Cap
(eg.)