RCA DLA-SX21SE Projector User Manual


 
21
R
P
R
/C
R
G
Y
B
P
B
/C
S
VDVIH/C
S
PC1
PC3
PC2
AUDIO IN
REMOTE
DC OUT
5V }1.5A
RS-232C OUT RS-232C IN Y/C VIDEO
CONTROL VIDEO IN
Video Device 1
Video Device 2
VCR (Video cassette recorder)
S-video cable
(separately available)
PC Audio cable
(separately available)
AV connection
cable (separately
available)
BNC Cable (separately available)
W-VHS or DVD player etc.
Laser videodisc player
Camcorder
Right side of projector
Image input
• Connect a composite image signal out-
put device or Y/C (S-video) image output
device.
Sound input
• Connect to AUDIO IN terminal.
Image input
• Connects to component signal out-
put device, DTV format signal out-
put device, etc.
• When the PC2 input terminal is
used, the “PC2(BNC)” item in
“Options” menu must be correctly
set. ( page 39)
Sound input
• Connect to AUDIO IN terminal.
Connecting to Various Devices
Before connection, be sure to turn off both the projector and device.
Connecting to Video Devices
Read thoroughly the manual that comes with each video device.
Use the supplied AV connection cable. S-video [Y/C] cable, BNC cable and PC Audio cables are not supplied.
Connection
When connecting a video device, please use a TBC along with it, or use one with a built-in TBC.
Use of an extension cable to connect a video device and the projector could cause image deterioration or projection failure.
When a signal with much jitter is reproduced on a VCR, or special-effect playback is performed, the upper part of the image
or the screen may be interrupted, erased or distorted.
Connecting to Devices