Filter
Top Products
Section 2 Connection Procedures
Rev. 3.00 Sep. 08, 2008 Page 10 of 18
REJ10J1396-0300
2.3 Recommended Dimensions for User System Mount Pad
Figure 6 shows the recommended dimensions for the mount pad (footprint) for the user system with
an IC socket for an PLQP0120LA-A package (NQPACK120SE-ND: manufactured by Tokyo
Eletech Corporation). The dimensions in figure 6 are somewhat different from those of the actual
chip's mount pad. Also, note the user system can not be connected to the user system interface cable
with inserting the guide pins in place.
Unit: mm
0.40 ± 0.05
0.40 x 29 = 11.6 ± 0.05
0.40 x 29 = 11.6 ± 0.05
0.2 ± 0.05
3.0 - φ1.0
5.8
5.8
0.40 ± 0.05
13.0 MAX
17.0 min
Figure 6 Recommended Dimensions for Mount Pad