Renesas M302N2T-PRB Network Card User Manual


 
( 3 / 38 )
Preface
The M302N2T-PRB is a pod probe for the M302N1 and M302N2 Group of Renesas 16-bit MCUs.
The M302N2T-PRB is used by connecting to the PC4701 emulator main unit and the M30200T-RPD-E
emulation pod main unit.
This manual mainly explains specifications and how to set up the M302N2T-PRB. For detail
information about the emulator main unit, emulation pod main unit, and emulator debugger, refer to
each user's manual.
Emulator main unit: PC4701 User's Manual
Emulation pod main unit: M30200T-RPD-E User's Manual
Emulator debugger: M3T-PD30 User's Manual
To check the components of this product, refer to "Table 2.1 Package Components" (page 14) in this
manual. If there is any question or doubt about this product, contact your local distributor.
To use the product properly
Precautions for Safety:
•Both in this User's Manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.