Filter
Top Products
M30870T-EPB User’s Manual 3. Usage (Emulator Debugger)
REJ10J0482-0300 Rev.3.00 February 16, 2006
3.2 Starting Up the Emulator Debugger (EMEM Dialog Box)
(1) Status tab
1. Specifying the processor mode
IMPORTANT
Notes on Selecting a Processor Mode:
When setting single-chip mode or memory expansion mode, the level of pin CNVSS of the MCU status should
be "L". The MCU status shows the pin level of the user system.
When setting microprocessor mode, the level of pin CNVSS of the MCU status should be "H".
When setting memory expansion mode or microprocessor mode, pins RDY* and HOLD* of the user system
should be "H".
When the user system is not connected, all modes are available.
Specifying the processor mode
Select the appropriate processor mode that suits you
r
system.
Page 57 of 104