Filter
Top Products
M30880T-EPB User’s Manual 5. Troubleshooting
REJ10J0497-0100Z Rev.1.00 January 16, 2005
Page 95 of 100
(3) Errors Occur at Debugger Startup
Table 5.3 Checkpoints of errors at debugger startup
Error Checkpoint
Target MCU is uncontrollable. (1) Check that the NQPACK etc. mounted on the user system is soldered
properly.
(2) Check that the connector is installed properly to the user system.
(3) Check pin NMI* is held high.
(4) The program may be uncontrollable in areas where memory is not
allocated.