Filter
Top Products
( 4 / 12 )
* Power cannot be supplied from the emulation pod for PC4701 (e.g. M38000TL2-FPD). A
separate power supply is needed.
1. Things to Check When Unpacking
The M38517T-ADS package consists of the following products. When unpacking your package,
check to see that all of these components are included.
Table 1.1 Package components
* If you find any item missing or faulty, or any suggestion, contact your local distributor.
2. Outline
The M38517T-ADS is a temporary target board used to develop software with a PC4701 emulator
system. It supplies to the emulator MCU the minimum required signals needed to operate the
emulator MCU, including power supply voltage, clock signals and reset signals. Use it when the
target system is not ready.
3. Specifications
Table 3.1 lists specifications of the M38517T-ADS.
Table 3.1 Specifications of the M38517T-ADS
Content
M38517T-ADS
M38517T-ADS User's manual (English/Japanese)
Temporary target board
User's manual
Item
Applicable MCU
Clock
Power supply voltage
RESET
External dimensions Width
Depth
Others
Content
M38507ARLSS, M38517RSS
4.0MHz oscillator mounted (oscillator circuit board OSC-2 used)
32.768 kHz (can be disconnected by SW1)
2.7 V to 5.5 V (supplied separately*)
• Reset circuit mounted (power-on reset and reset switch)
• Connects the reset output of an emulation pod
90 mm
115 mm
Universal part prepared