Filter
Top Products
RL78/G1C Group USB Charger Solution Kit R0K578G1CD010BR
R01AN1911EJ0101_RL78G1C Rev.1.01 Page 18 of 23
Apr 10, 2014
6.4 Supplying Power
1. Connect the USB Standard-A connector to a USB device via the USB cable included in this
product.
The device starts charging after Power Supply mode (Note 1) and amount of power supply
current are displayed in the LCD.
The blinking speed of the LEDs (green) changes based on amount of power supply current.
Note 1 BC: Devices supporting Battery Charging
NON-BC: Devices not supporting Battery Charging
2. This product automatically stops supplying power when the USB cable is disconnected
or the battery voltage level is too low (2900mV).
USB Standard-A connection
[Default Display]
[VID, PID Display]
After 3 seconds
[Power Supply Display]
25 ℃ 3752
mV
1000 lx 0:00
VID=045B 3752 mV
PID=8122 0:00
1230
mA 3752 mV
BC 0
:00