Ricoh DSm622 All in One Printer User Manual


 
Getting Started
22
1
Turning On the Power
This machine has two power switches.
Operation switch (right side of the
control panel)
Press to activate the machine.
When the machine has finished
warming up, you can make copies.
Main power switch (left side of the ma-
chine)
Turning off this switch makes the
main power indicator on the right
side of the control panel go off.
When this is done, machine power
is completely off.
When the fax unit (optional) is in-
stalled, fax files in memory may be
lost if you turn this switch off. Use
this switch only when necessary.
Note
This machine automatically enters
Energy Saver mode or turns itself
off if you do not use it for a while.
See p.56 Auto Off Timer.
Turning On the Main Power
A
AA
A
Make sure that the power cord is
firmly plugged into the wall outlet.
B
BB
B
Open the switch cover, and then
turn on the main power switch.
The main power indicator goes on.
Important
Do not turn off the main power
switch immediately after turn-
ing it on. Doing so may result in
damage to the hard disk or
memory, leading to malfunc-
tions.
Turning On the Power
A
AA
A
Press the operation switch.
The On indicator goes on.
Note
If the power does not come on
when the operation switch is
pressed, check the main power
switch is on. If it is off, turn it on.
ZFFH250E
RussianC3_AEgsg-F_FM.book Page 22 Monday, June 16, 2003 6:35 PM