Filter
Top Products
Control Panel
13
1
9. Operation switch (On indicator)
Press to turn the power on. The On indi-
cator lights. To turn the power off, press
again.
Note
❒ This key is inactivate during scanning
or while setting defaults.
Reference
p.15 “Turning On the Power”
10. {Sort} key
Automatically sorts copies.
11. {Lighter} and {Darker} keys
Press to change the image density setting.
Select the image density in three incre-
ments, Lighter to Darker.
12. {Escape} key
Press to cancel an operation or return to
the previous display.
13. {Original Type} key
Press to select the original type registered
in [Original Type 1 (Text)] or [Original Type 2
(Photo)]. When the original type is select-
ed, the corresponding indicator lights.
14. {OK} key
Press to set a selected item or an entered
numeric value.
15. Number keys
Press to enter numeric values.
16. {#} key
Press to set a selected item or an entered
numeric value.
17. {Start} key
Press to start copying, printing, or scan-
ning or sending.
Display
The display panel shows machine status, error messages, and function menus.
Important
❒ A force or impact of more than 30 N (about 3 kgf) will damage the display.
❖ Initial copy display
1. Operational status or messages
2. Messages and the selected tray ap-
pear here. Currently selected items
appear in brackets.
3. Number of copies set.
4. Reduce/Enlarge ratio function for
non-fixed ratios.
When you select or specify an item on the display, it is highlighted like .
AAX024S
1 32
4
AAI024S
KirC3a_oi_AE-F_FM.book Page 13 Friday, March 10, 2006 10:25 AM