Ricoh IS 2315 All in One Printer User Manual


 
Copy Paper
79
9
*1
Paper weight: 80 g/m
2
, 20 lb
*2
When you set custom size paper in the bypass tray, You can specify the size.
*3
8K(Ba-Kai) = 267 × 390 mm, 10.6" × 15.4"
*4
16K(Shi-Lui-Kai) = 195 × 267 mm, 7.7" × 10.6"
*5
Set one sheet at a time for your needs.
Important
If you use damp or curled paper, a misfeed might occur. In such a case, try
turning over the paper stack in the paper tray. If there is no improvement,
change to copy paper with less curl.
Note
When using the bypass tray, we recommend you set the copy paper direction
to L.
Reference
To change the paper size, see p.59 “Changing the Paper Size”.
Unusable Paper
R
CAUTION:
Important
Do not use any of the following kinds of paper or a fault might occur:
Art paper
Aluminum foil
•Carbon paper
•Conductive paper
Do not use copy paper that has been already copied on. Otherwise, a paper
misfeed might occur.
Note
Do not use any of the following kinds of paper or a misfeed might occur.
Bent, folded, or creased paper
Torn paper
Slippery paper
Perforated paper
Rough paper
Thin paper that has low stiffness
Paper with a dusty surface
If you make copies on rough grain paper, the copy image might come out
blurred.
Do not use paper already copied or printed on.
Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or machine failure.
KirC3a_oi_AE-F_FM.book Page 79 Friday, March 10, 2006 10:25 AM