Filter
Top Products
Facsimile Features
166
4
L Enter the vertical size of the paper using the number keys, and then press
the {q} key.
Specify a vertical size from 100 mm (4.0") to 305 mm (12.0"). You cannot enter
a size smaller than 100 mm or larger than 305 mm.
Each time you press [mm] or [inch], the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [mm] or [inch],
it is converted automatically (fractions are rounded off).
M Enter the horizontal size of the paper using the number keys, and then
press the {q} key.
Specify a horizontal size from 140 mm (5.5") to 600 mm (23.6"). You cannot en-
ter a size smaller than 140 mm or larger than 600 mm.
Each time you press [mm] or [inch], the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [mm] or [inch],
it is converted automatically (fractions are rounded off).
N Press [OK].
O Press [Exit].
P Press the {User Tools/Counter} key.
Note
❒ If you select [Auto Detect], the machine recognizes the paper size automati-
cally.