Filter
Top Products
Network Settings
21
1
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒ When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Scan to Folder Function
This section lists the settings required for sending files.
Ethernet
This section lists the settings required for sending files with an Ethernet connec-
tion.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Heading Setting Item Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address Necessary
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
Ethernet Speed As required
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS Communication As required
Interface Settings/Network
Host Name As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required