Filter
Top Products
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 802.11b (wireless LAN) connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Heading Setting Item Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address As required
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS Communication As required
Interface Settings/Network
Host Name As required
Interface Settings/IEEE 802.11b
Communication Mode Necessary
Interface Settings/IEEE 802.11b
SSID Setting As required
Interface Settings/IEEE 802.11b
Channel As required
Interface Settings/IEEE 802.11b
Security Method As required
Interface Settings/IEEE 802.11b
Transmission Speed As required