Ricoh PJ X3241 Projector User Manual


 
53
Others
List of supported signals (RGB signals)
This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
Resolution Mode
Refresh rate
(Hz)
H-frequency
(kHz)
Clock
(MHz)
720 x 400 720x400_85
85.039 37.927 35.500
640 x 480 VGA_60 59.940 31.469 25.175
VGA_72 72.809
37.861 31.500
VGA_75 75.000 37.500 31.500
VGA_85 85.008 43.269 36.000
800 x 600 SVGA_56 56.250 35.156 36.000
SVGA_60 60.317 37.879 40.000
SVGA_72 72.188
48.077 50.000
SVGA_75 75.000 46.875 49.500
SVGA_85 85.061 53.674 56.250
832 x 624
MAC16" 74.550 49.725 57.283
1024 x 768
XGA_60 60.004 48.363 65.000
XGA_70 70.069 56.476 75.000
XGA_75 75.029 60.023 78.750
XGA_85 84.997 68.667 94.500
MAC19" 74.700 60.134 79.857
1152 x 864
SXGA1_75 75.000 67.500 108.000
*1280 x 800
WXGA_60 59.880 49.580 83.300
1280 x 960
QuadVGA_60 60.000 60.000 108.000
QuadVGA_85 85.002 85.938 148.500
1280 x 1024
SXGA3_60 60.020 63.981 108.000
SXGA3_75 75.025 79.976 135.000
SXGA3_85 85.024 91.146 157.500
1400 x 1050 SXGA+ 59.978 65.317 121.750
1600 x 1200
UXGA_60 60.000 75.000 162.000
UXGA_65 65.000 81.250 175.500
UXGA_70 70.000 87.500 189.000
UXGA_75 75.000 93.750 202.500
UXGA_85 85.000 106.250 229.500
* : 1280 x 800 is available only for WX3131
Note
Signals whose resolution exceeds the native resolution mentioned below will be compressed.
For this reason, some information may be lost, or image quality may be affected.
X3131/X3241 : 1024 × 768 resolution
WX3131 : 1280 × 800 resolution