Filter
Top Products
2. Setting the Originals
I
1
J
1. Adjust the original guides to the size
of the original.
2. Insert the original face down on the
original table until it stops.
.
Only one original can be set at a time.
3. Select the image
Image Mode keys.
.
Use the line mode
printed matter.
mode using the
when the original is
. Use the photo mode when the original
contains photos or colored images.
●
The line mode is automatically selected
when the main switch is turned on.
4. If reduced prints are desired, set the
reproduction ratio using the
Reduc-
tion
key.
.
The reduction ratio will change as follows:
93% - 75V0+64%
● 11” x 17’ original cannot be printed in
100% mode. Select 64Y0.
●
100% mode is automatically selected
when the main switch is turned on.
16