Filter
Top Products
1. Top Unit
2. Original Guides
3. Original Table
4. Original Table Release
Lever
5. Feed Roller Pressure
Lever
6. Separation Roller
Pressure Lever
7. Paper Feed Side Plate
8. Paper Feed Table
9. Side Plate Fine
Adjusting Dial
10. Front Door
11. Paper Delivery Table
12. Operation Panel
13. Original Tray
Open to remove the misfed original.
Adjust these guides to position the originals
correctly.
Place the originals on this table.
Use to open the original table unit to the left
for master installation.
Use to adjust the contact pressure of the
paper feed roller according to paper thickness.
Use to adjust the separation roller pressure to
prevent double feed.
Use to prevent paper skew.
Set the paper on this table.
Use to shift the paper feed table sideways.
Open for access to the inside of the machine.
Completed prints are delivered here.
Operator controls and indicators are located
here.
Originals used to make a master are delivered
to this tray.