Filter
Top Products
100-398-01 19
Command line
Chapter 4
Using the command line interface
Refer to the
Smart Ringswitch Family User Guide
(part number 100-291) for information about setting up
Ringswitch serial ports, telnet sessions and generic commands to use the command line interface. The
Smart
Ringswitch Family User Guide
also contains a reference of all Ringswitch and option module command lines.
Configuring the Smart Ringswitch Gigabit Module
If you have a Smart Ringswitch Gigabit Module installed, you can use the following commands to configure
the card.
Setting the Gigabit port IPX mode
The
set gigabit port IPX mode
command enables or disables the translational bridging of IPX frames.
Command:
>set Gigabit port IPX mode <slot>:<port> <1,2>
Parameter:
slot
Slot number
port
Port number
1
Enable
2
Disable
Gigdoc.book Page 19 Tuesday, October 17, 2000 9:44 AM