Filter
Top Products
CONFIGURATION MENUS
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
13
Main configuration menu
Figure 5. Main configuration menu
The UltraView Pro uses a command to establish communication to
the UltraView Pro and not a CPU. This command input is a press
and release of the left control <Ctrl> key, then the command. The
command must be entered within 2 seconds of pressing and
releasing the left control key or the UltraView Pro re-establishes
communication with the connected CPU.
The main configuration menu is accessed from the keyboard by
pressing and releasing the left control <Ctrl> key and within 2
seconds pressing the F12 key. The main configuration menu will
display on the KVM monitor. From this menu, you can configure the
system, configure the connected computers, the appearance or
overlay of the displayed menus, and assign unique passwords for
accessing the configuration menus and a password for accessing
the connected computers. Use the up/down arrow keys to select
which section menu to configure and press enter.
UltraView Pro version UP18 Copyright 2000 – 02 Rose Electronics
Use arrow keys to highlight
selection and press enter
or press escape to exit
View/change keyboard, mouse, expansion, and scanning
Main configuration men
u
Configure computers
Configure overlay
Configure security
Exit
Configure system