Filter
Top Products
CASE 5600 series
User Manual
7
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Micro ATX Motherboard
2.1
Locate and align the screw holes on the
motherboard and chasis; place the
motherboard at the correct position,
and then screw copper motherboard stand-
offs brass studs onto chassis's metal shell.
Note: Screw holes marked with "M" are
motherboard stand-off positions for micro
ATX motherboard.
2.2
Sit the motherboard on themotherboar
stand-offs and screw in all the screws
into the motherboard stand-offs.