Filter
Top Products
SATA+ULTRA ATA RAID CONTROLLERRC212 User Manual
21
7. Select VIA RAID Controller (Windows 2000), then press Enter.
8. Press Enter again to finish driver installation, then follow the on-screen instructions
to complete the Windows installation.
＊For An Existing Installation
1. Setup the RAID Array prior to driver installation and boot up to Windows.
2. At the Found New Hardware Wizard window pop-up, please click Cancel button
to cancel the driver installation for the device at this moment. The driver for this
device will be installed in the next step.
3. Please insert the CD driver bound with PCI SATA+PATA RAID card into your
CD-ROM Drive.
4. At the Windows desktop, click Start, then Run.
5. Type D:\RC-212\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive
letter)
6. Follow the on-screen instructions to complete the installation.
7. Restart Windows to complete the installation.
＊
To Verify Windows® 2000/XP/Server 2003 Installation
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Double click SCSI and RAID Controller, then double click VIA VT6421 RAID
Controller to display driver properties. A message this device is working properly is
displayed in the dialog box, the driver has been correctly installed.