Filter
Top Products
Wireless Adapter RNX-G300EX/LX User Manual
- 60 -
A. WPS Configuration : The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security
setup and management of Wi-Fi networks. Ralink STA as an Enrollee or external Registrar supports the configuration setup
using PIN configuration method or PBC configuration method through an internal or external Registrar.
B. WPS AP List : Display the information of surrounding APs with WPS IE from last scan result. List information include SSID,
BSSID, Channel, ID (Device Password ID), Security- Enabled.
C. Rescan : Issue a rescan command to wireless NIC to update information on surrounding wireless network.
D. Information : Display the information about WPS IE on the selected network. List information include Authentication Type,
Encryption Type, Config Methods, Device Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and
RF Bands.
It's detail follows WPS Information on AP.
E. PIN Code : 8-digit numbers. It is required to enter PIN Code into Registrar using PIN method. When STA is Enrollee, you
can use "Renew" button to re-generate new PIN Code.
F. Config Mode : Our station role-playing as an Enrollee or an external Registrar.
G. Table of Credentials: Display all of credentials got from the Registrar. List information include SSID, MAC Address,
Authentication and Encryption Type. If STA Enrollee, credentials are created as soon as each WPS success. If STA Registrar,
RaUI creates a new credential with WPA2-PSK/AES/64Hex-Key and doesn't change until next switching to STA Registrar.
H. Control items on credentials
H-1. Detail : Information about Security and Key in the credential.
H-2. Connect : Command to connect to the selected network inside credentials. The active selected credential is as like as
the active selected Profile.
H-3. Rotate : Command to rotate to connect to the next network inside credentials.
H-4. Disconnect : Stop WPS action and disconnect this active link. And then select the last profile at the Profile Page of
RaUI if exist. If there is an empty profile page, the driver will select any non-security AP.
H-5. Export Profile: Export all credentials to Profile.
H-6. Delete : Delete an existing credential. And then select the next credential if exist. If there is an empty credential, the
driver will select any non-security AP.
I. PIN : Start to add to Registrar using PIN configuration method. If STA Registrar, remember that enter PIN Code read from
your Enrollee before starting PIN.
J.PBC : Start to add to AP using PBC configuration method.
*When you click PIN or PBC, please don't do any rescan within two-minute connection. If you want to abort this setup within
the interval, restart PIN/PBC or press Disconnect to stop WPS action.
K. WPS associate IE : Send the association request with WPS IE during WPS setup. It is optional for STA.
L. WPS probe IE : Send the probe request with WPS IE during WPS setup. It is optional for STA.
M. Progress Bar : Display rate of progress from Start to Connected status.
N. Status Bar: Display currently WPS Status.
O. Automatically select the AP: Start to add to AP by using to select the AP automatically in PIN method.
**There are examples in section 2-7-3(PIN Enrollee Setup), section 2-7-4(PBC Enrollee Setup) and section 2-7-5(Registrar
Configures and AP)**
ICONS AND BUTTONS:
Show the information of Status Section.
Hide the information of Status Section.